Sony PDW-F1600 Operation Manual Download Page 149

Page: 149 / 198

149

Maintenance Menu

Chap

r 7

Men

M38: F-KEY
CONFIG

For details, refer to the Maintenance Manual.

M380: HOME2

Assign a function menu item to page HOME2 of the function menu as a user
setting.

M381: PAGE8 ASSIGN

Assign a setup menu item to page P8 of the function menu as a user setting.

M382: PAGE8 NAME

Specify the name of a setup menu item assigned with M381: PAGE8 ASSIGN.

M38F: NV-RAM
CONTROL

Save the settings of M380 to M382.

M39: OTHER
CONFIG

M390: MIXED REC

Select whether to enable mixed format recording mode.

DISABLE:

Do not enable.

ENABLE:

Enable.

M391: VITC REC

Select whether to record the VITC in the input HDSDI signals in the LTC user bits
area.

DIS:

Do not record.

ENA:

Record.

M392: PB POS

When you switch between the clip playback screen and the clip list playback
screen, specifies the clip or sub clip playback start position.

KEEP:

Play from the position where playback stopped.

FORCED TOP:

Play from the first frame of the first clip or sub clip.

M393: AUDIO DSP

Select the function for which the audio digital signal processor shall be used.

linear edit:

Use for linear editing (microphone input is disabled).

AGC/limiter:

Use for microphone input (linear editing is disabled).

Note

It is not possible to use the audio digital signal processor for multiple functions at
the same time.

M394: HD L.EDIT

Specify the linear editing mode.

Standard:

Software version 1.51 compatible editing mode (standard mode)

Extra:

Editing mode that supports normal HD422 clips (extra mode)

Notes

• Clips edited in extra mode cannot be edited on XDCAM devices with software

versions earlier than 1.51, or on this unit when this unit is set to standard mode.

• If you want to use extra mode, select extra mode on every PDW-F1600/HD1500

that you connect to the editing system.

M3: OTHERS: Other setting items

Item

Setting

Summary of Contents for PDW-F1600







































































































































































































Search results

Summary of Contents for PDW-F1600

Reviews:

Related manuals for PDW-F1600

Brands by name

Popular brands

Sony PDW-F1600, Operation Manual

Search results

Summary of Contents for PDW-F1600

Reviews:

Related manuals for PDW-F1600

Brands by name

Popular brands