Sony PDW-F1600 Operation Manual Download

Page: 138 / 198

138

Setup Menu

Chapt

Men

a) Not displayed when the unit is in 23.98P mode.
b)

When the PDBZ-UPG02 Software Upgrade Key is installed.

When the PDBK-S1500 or PDBK-F1500 option is installed.

653

UMID HD VANC LINE

Specify the HDSDI signal VANC line into which the UMID should be
inserted.

9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)

Note

The output VANC line during playback follows the setting for recording.

See “Using UMID Data” (page 176) for more information about UMID.

657

ESSENCE MARK SDI OUTPUT

Select whether to output essence marks in the SDI output VANC.

off:

Do not output.

on:

Output.

660

ESSENCE MARK SD VANC LINE

When menu item 657 is set to “on”, select the line to which to output
essence marks.

12 H (12 line), 13 H (13 line), 15 H (15 line), 16 H (16 line), 17 H (17

line), 18 H (18 line), 19 H (19 line) (59.94i/59.94P/29.97P mode)

9 H (9 line), 10 H (10 line), 12 H (12 line), 13 H (13 line), 14 H (14 line),

15 H (15 line), 16 H (16 line), 17 H (17 line), 18 H (18 line) (50i/50P/
25P mode)

665

ESSENCE MARK HD VANC LINE

When item 657 is set to “on”, select the line to which to output essence

marks.

9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)

Note

The output VANC line during playback follows the setting for recording.

666

METADATA ITEM OUT

Specify whether to include the information from recorded VANC packets
in data items in the DATA ITEM section of MXF files.

off:

Do not include VANC packet information in data items.

on:

Include VANC packet information in data items.

668

USER META DATA OUTPUT IN
MXF

Select whether to output user metadata to MXF files.

off:

Do not output.

on:

Output.

669

ESSENCE MARK RECORD MODE

Specify when essence marks can be recorded during connections to a

switcher.

normal:

Always allow essence marks to be recorded.

rec:

Allow essence marks to be recorded only during recording.

Menu items in the 600s, relating to the timecode, metadata, and UMID

Item number

Item name

Settings

HD1500
HD1500

Summary of Contents for PDW-F1600







































































































































































































Search results

Summary of Contents for PDW-F1600

Reviews:

Related manuals for PDW-F1600

Brands by name

Popular brands

Sony PDW-F1600, Operation Manual

Search results

Summary of Contents for PDW-F1600

Reviews:

Related manuals for PDW-F1600

Brands by name

Popular brands