Sony PCS-VCS, Operating Instructions Manual

Page: 38 / 99

38
Calling to a Meeting
Select an Endpoint with a H.323 Alias
1
Select [Input H.323 Alias] from the pull-down menu below the Meeting list.
2
Enter the H.323 Alias of the applicable Endpoint in the text box.
3
Click the [Call to Meeting] button.
“Updating was completed” message is displayed.
Select an Endpoint with a E.164 Number
1
Select [Input E.164 Number] from the pull-down menu below the Meeting list.
2
Enter the E.164 Number of the applicable Endpoint in the text box.
3
Click the [Call to Meeting] button.
“Updating was completed” message is displayed.
Select an Endpoint with an IP Address
1
Select [Input IP Address] from the pull-down menu below the Meeting list.
2
Enter the IP Address of the applicable Endpoint in the text box.
3
Click the [Call to Meeting] button.
“Updating was completed” message is displayed.
Select an Endpoint from the List
1
Click the [Select EP] button.
The [Select End Point] screen will be displayed.
2
Select the applicable Endpoint from the Endpoint List
The [Call to Meeting] button is displayed in the lower part of the [Select End
Point] screen.
3 Click the [Call to Meeting] button.
“Updating was completed” message is displayed.
5
Click [OK].
The Selected Endpoint is then called.
If two or more Endpoints are selected, there will be a delay before all Endpoints are
called to the Meeting.
Note