Result screen (2/2)
Note
Items without a description are the same as on the calibration screen.
Displays the output level using a green audio level bar. This cannot be changed.
[Gain limit]
Displays the gain limit status.
6.
[Mic gain]
Displays the default value of the microphone gain.
This cannot be changed using this screen.
7.
[Test signal]
Press the icon to output an audio test signal (0 dB level). Press again to stop the test signal.
8.
[Status]
Displays error messages for each MAS-A100 if a problem occurs.
9.
[Calibrate] button
Press the button to start calibration. A noise signal is output from each MAS-A100 for about 5 seconds.
For multiple MAS-A100 units, each MAS-A100 outputs the noise signal in sequence.
10.
[Gain limit]
1.
22
