MAS-A100 information setup screen (3/3)
Displays a list of the MAS-A100 units selected on the MAS-A100 initial setup screen. Configure information, such as the
location, to identify each MAS-A100 unit.
[Password]
Enter the administrator user password comprising 8 to 64 characters for each MAS-A100.
The following characters are valid.
Alphabetic characters
Numeric characters
Symbols ( ! $ % ‘ ( ) = - ~ ^ | @ ` [ { } ] _ / ? < > + * . )
Placing a check mark in [Same as this app] is equivalent to entering the same password used to log in to this
application.
6.
[Set-up]
Press the icon to launch Google Chrome with the web UI of the corresponding MAS-A100. The MAS-A100 is
initialized using the web UI.
7.
[Status]
Displays the status of each MAS-A100.
If [OK] is not displayed, it indicates that some further action is required in order to register the MAS-A100 in this
application.
[OK]:
Indicates that the MAS-A100 is ready to be registered in this application.
[Uninitialized]:
MAS-A100 unit is in the factory default state. Initialize (set up) the MAS-A100.
[IP address is not accessible.]:
IP address of the MAS-A100 cannot be accessed. Check the network connection,
IP address setting of the MAS-A100, and HTTP proxy setting of the PC running this application.
[Username and Password do not match.]:
Settings entered in [Username] or [Password] do not match the settings
configured on the MAS-A100. Enter the correct settings.
8.
[Cancel] button
Press to return to the MAS-A100 discovery screen.
9.
[Next] button
Applies the configured settings, and displays the next screen.
10.
13
