Sony MASM-1 Help Manual Download Page 31

Page: 31 / 32

Help Guide

Microphone Array System Manager

MASM-1

Usage Precautions

Security

SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT

PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING

FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.

Depending on the operating environment, unauthorized third parties on the network may be able to access the unit.

When connecting the unit to the network, be sure to confirm that the network is protected securely.

From a safety standpoint, when using the unit connected with the network, it is strongly recommended to access the

Control window via a Web browser and change the access limitation settings from the factory preset values.

Changing the password regularly is also recommended.

Do not browse any other website in the Web browser while making settings or after making settings. Since the login

status remains in the Web browser, close the Web browser when you complete the settings to prevent unauthorized

third parties from using the unit or harmful programs from running.

Summary of Contents for MASM-1































Search results

Summary of Contents for MASM-1

Reviews:

Related manuals for MASM-1

Brands by name

Popular brands

Sony MASM-1, Help Manual

Search results

Summary of Contents for MASM-1

Reviews:

Related manuals for MASM-1

Brands by name

Popular brands