[System] page
This page is used to check/change the system settings of the MAS-A100.
To avoid deterioration in audio quality, set the microphone gain in the range so that the gain limit lamps are not lit or
only one lamp is lit.
[Mic gain]
Displays the default value of the microphone gain.
Press the +/– buttons, or press the value and enter a new value directly, to change the setting.
Changes are applied immediately without pressing the [Set] button.
3.
[Capture range]
Selects the capture range.
4.
[Noise reduction]
Selects the noise reduction level.
5.
[Feedback reduction]
Selects the feedback reduction level.
6.
[Noise gate]
Selects the noise gate level.
7.
[Equalizer 60Hz], [Equalizer 250Hz], [Equalizer 1kHz], [Equalizer 4kHz], [Equalizer 12kHz]
Displays the default equalizer value for each frequency.
Press the +/– buttons, or press the value and enter a new value directly, to change the setting.
Changes are applied immediately without pressing the [Set] button.
8.
[Status]
Displays error messages for each MAS-A100 if a problem occurs.
9.
19
