Sony IFB-LE100, Service Manual, Page: 43 / 258

1-37
VPD-LE100A/LE100E/LE100U
28
Adjusting the Picture
This section describes how to adjust the focus, size and
vertical/horizontal position of the picture.
1
Press the PATTERN key to display the HATCH
pattern.
2
Press the FOCUS key then the
M
or
m
key to
adjust the focus.
“FOCUS” appears on the screen during
adjustment.
3
Press the ZOOM key then the M or m key to adjust
the picture size.
“ZOOM” appears on the screen during adjustment.
4
Press the FOCUS key then the M or m key to
adjust the focus again.
“FOCUS” appears on the screen during
adjustment.
5
Press the SHIFT key then the M / m / < / , keys to
adjust the vertical/horizontal position of the
picture.
“PICTURE SHIFT” appears on the screen during
adjustment.
6
Press the PATTERN key again to clear the
HATCH pattern.
Adjusting the Picture
Notes
• The picture adjustments can be performed only when
FOCUS, ZOOM or PICTURE SHIFT is displayed on
the screen. If the display disappears, press the
FOCUS, ZOOM or SHIFT key again, and adjust with
the
M
/
m
/
<
/
,
keys.
• Focus may drift depending on the temperature.
Therefore, we recommend you adjust the focus after
you have turned on the projector and projected the
picture for more than 30 minutes. Even after you
have adjusted the focus exactly, slight lack of focus
may occur when the lens is not sufficiently warmed,
e.g. immediately after the power is turned on. In such
a case, the correct focus is recovered by projecting
the picture for more than 30 minutes.
• If you cannot obtain the correct focus on the upper
and lower parts of the screen by pressing the
M
or
m
key, the adjustment inside the projector may be
required. Please consult with qualified Sony
personnel.
Caution
Do not look into the lens when the projector lamp is
on. Doing so may damage the eyes.
29
Selecting the Menu
Language
You can select one of seven languages for the menus
and other on-screen displays. The factory setting is
English.
1
Set the POWER switch on the front of the
projector to ON.
The STANDBY indicator lights in red and the
projector enters the standby mode.
2
Press the ON key to turn the power on.
The ON indicator lights in green.
3
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in
yellow.
PICTURE CTRL
CONTRAST:
BRIGHT:
COLOR TEMP: 80
50
6500
GAMMA MODE: 2.2
INPUT-A
4
Press the M or m key to select the icon, then
press the
,
or the ENTER key.
The setting items of the SET SETTING menu are
displayed.
SET SETTING
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
1
1
ON
ENGLISH
1
FRONT&REAR
INPUT-A
STATUS: AT
OFF
C. BLACK:
OFF
Selecting the Menu Language
5
Press the
M
or
m
key to select “LANGUAGE,”
then press the
,
or the ENTER key.
The language options are displayed.
0 1
0 1
POWER SAVING:
OFF
FRONT&REAR
CEILING-FRONT
FLOOR-FRONT
SET SETTING
STATUS:
LANGUAGE:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
ON
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
INPUT-A
INSTALLATION:
C. BLACK:
6
Press the M or m key to select the desired
language, then press the
<
or the ENTER key.
The menu changes to the selected language.
To clear the menu display
Press the MENU key. The menu display also
disappears automatically if no key is pressed for one
minute.
Adjustments