Sony IFB-LE100, Service Manual, Page: 35 / 258

1-29
VPD-LE100A/LE100E/LE100U
12
Location and Function of Controls
1
ON/STANDBY keys
ON: Press to turn on the power of the projector.
STANDBY: Press to make the projector enter
standby mode.
2 MEMORY key
The key does not function with this projector.
3 CENT R/B keys
The keys do not function with this projector.
4
COMMAND ON/OFF switch
No keys except for the LIGHT button on the Remote
Commander function when this switch is set to OFF.
This saves battery power.
5 RGB keys
Adjust the picture.
APA (Auto Pixel Alignment): Adjusts the position
of the picture on the screen automatically so that
the picture is clearly visible when the signals are
input from a computer.
DOT PHASE: Adjusts the phase of the signal input
from a computer. After pressing this key, adjust
the position of the picture using the four arrow
keys so that the clearest picture is obtained.
SIZE: Enters the size adjustment mode for the input
signal. Adjust the horizontal size of the picture
using the arrow keys.
< : to reduce horizontal size
,
: to expand horizontal size
SHIFT: Enters the shift adjustment mode for the
input signal. Adjust the position of the picture
using the four arrow keys. The picture shifts in the
direction of the arrow on the pressed key.
Note
The service adjustment keys
qk
to
wf
can function
only when the projector is in service mode. Normally,
in user mode, these keys are covered and inoperative
to prevent accidental adjustments.
For entering the service mode, see page 37. For opening
the cover of the service adjustment keys, see page 15.
Remote Commander
The Remote Commander can be used as a wireless or
wired Remote Commander. The keys on the Remote
Commander with the same names function the same as
those on the control panel of the projector.
For details on control panel keys on the projector, see pages
8 and 9.
SELECT
VIDEO MEMORY
SWITCHER INDEX
PIC ON AUDIO OFF
PATTERN FOCUS ZOOM SHIFT
NORMAL
MUTING STATUS
LCD LENS CONTROL
ON
COMMAND
OFF
SIZE DOT PHASE
APA
SHIFT
RGB
R
B
CENT
ON STANDBY
MEMORY MENU
VIDEO
INPUT SELECT
A D B C
BLKG SYS SET RESET FUNCTION
1 4 2 3
5 8 6 7
9 10/0(ALL)
SW NO/
OFF/GROUP
SWITCHER/VIDEO MEMORY/INDEX
ENTER
POSITION BRIGHT CONTR
PICTURE CONTROL
HUE COLOR SHARP VOL
VIDEO/S VIDEO
LIGHT
R G
CENT SIZE
CUT OFF
B
LIN
R G
ADJ
B BIAS GAIN
W/B
MG FOCUS LENS
FOCUS
SKEW BOW
REGISTRATION
KEY PIN ZONE
POSITION
5 6 7 8 4 3 2
1
w; wa ws ql qk
qf
qd
qs
qh
qj
qg
qa
0
9
ea
es
e;
wl
wg
wk
wj
wh
wf
wd
ed
13
Location and Function of Controls
6 STATUS ON/OFF keys
Press OFF to eliminate the on-screen display.
Press ON to restore the on-screen display.
Note
The menus and warning messages appear even if the
OFF key is pressed.
7 Transmission indicator
The light goes on each time a key is pressed. If the
indicator does not light, replace the batteries.
8 LIGHT button
Illuminates the key indicators when the COMMAND
switch is set to ON. If the switch is set to OFF, only
the COMMAND switch is illuminated.
If you do not press any key on the Commander for
more than 30 seconds, the key indicators turn off
automatically. The indicators also turn off if you press
the LIGHT button again.
9
MUTING keys
PIC (picture): Press to cut off the picture. Press
again to restore the picture.
AUDIO: The key does not function with this
projector.
q; NORMAL key
The key does not function with this projector.
qa LCD LENS CONTROL keys
Functions the same as the LENS CONTROL keys on
the control panel.
Press one of the ZOOM, SHIFT and FOCUS keys and
then the arrow keys.
qs PATTERN key
Displays a HATCH pattern on the screen for focus,
zoom, and shift adjustments.
In the user mode, press the PATTERN key again to
turn off the white HATCH pattern.
In the service mode, press the PATTERN key
repeatedly to display the input signal, white HATCH
pattern and white signal cyclically.
qd BLKG (blanking) adjustment key
Enters the blanking adjustment mode.
Next, press the
M / m key to select the position to be
adjusted on the screen, and then adjust the position
using the
<
/
,
keys.
qf SYS SET (system set) key
When the PC-3000 Signal Interface Switcher is used in
the system or the system connections are changed,
press this key. This makes the projector confirm the
system construction and the settings of the interface
boards.
Note
After connecting the PC-3000 switcher and pressing
the SYS SET key, the input channel is set to SW1-1
when connecting a single switcher, or to SW1-2 when
connecting two or more switchers.
qg
INPUT SELECT keys
Selects the input signal.
VIDEO: The key does not function with this
projector.
SELECT VIDEO/S VIDEO: The key does not
function with this projector.
A/B/C/D: Functions the same as the INPUT SELECT
A/B/C/D keys on the control panel.
qh SWITCHER/VIDEO MEMORY/INDEX keys
When the SWITCHER/VIDEO MEMORY/
INDEX select switch is set to SWITCHER
When the PC-3000 switcher is connected to the
projector, press a number key (1 to 8) to select the
input from the switcher. Number key 9 does not
function.
When one switcher is connected, press the input
number key directly.
When multiple switchers are connected, press the SW
NO/OFF/GROUP key. Next press the switcher number
(1 to 8) and the input number (1 to 8) in sequence. Be
sure to press the keys one after another within 2
seconds.
e.g. To select input 4 of switcher 2, press the keys
as follows:
SW NO
t 2 t 4.
When the SWITCHER/VIDEO MEMORY/
INDEX select switch is set to INDEX
Used to specify the device or group index number.
qj
SWITCHER/VIDEO MEMORY/INDEX select
switch
Selects the function of the SWITCHER/VIDEO
MEMORY/INDEX keys.
SWITCHER: Selects the input from the PC-3000
switcher.
VIDEO MEMORY: The position does not function
with this projector.
INDEX: Selects a projector by its index number
when multiple projectors are used.
qk CUT OFF R/G/B keys
Select the color to be turned off. Press again to turn on
the color.