6-88
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
3-15. S Reel Table Ass’y
3
S reel table ass'y
S reel shaft
Claw
Claw
1
Screw
(M1.4
×
2.0)
FWD ADJ
S reel shaft
2
Tension
regulator
band
1.
Removal procedure
1) Remove the screw (special head screw M1.4
×
2.0)
1
.
2) Remove the tension regulator band
2
from the S-reel table
ass’y.
3) While freeing the claw at the location in the direction of the
arrow, remove the S-reel table ass’y
3
from the S reel shaft.
2.
Attachment procedure
1) Insert the S-reel table ass’y
3
into the S-reel shaft. While
rotating it, snap it in. (Verify that it is locked.)
2) Insert the tension regulator band into the groove of the S-reel
table ass’y. While pushing the FWD ADJ with finger, fix it
with the screw 1 (special head screw M1.4
×
2.0).
Tightening torque: 0.06
±
0.01 N•m (0.61
±
0.1 kgf•cm)