Sony HVR-HD1000C, Service Manual, Page: 195 / 426

6-47
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
20. Color Reproduction Adjustment & Check
(Indoor HD)
RadarW RadarW RadarW
Adjust the color separation matrix coefficient so that proper color
reproduction is produced.
Subject Color bar chart
(Color reproduction adjustment
frame)
Measurement Point Video reminal of A/V jack
(75
Ω
terminated)
Measuring Instrument Vectorscope, Oscilloscope
Adjustment Page 6F
Adjustment Address A8 to B7
Specified Value All color luminance points should
settle within each color reproduction
frame.
Note 1: Perform “F No. & ND Light Quality Standard Data In-
put” and “Auto White Balance Standard Data Input” be-
fore this adjustment.
Note 2: If reading/writing data on pages 6F, set data: 06 to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages 6F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHT SHOT .................................................................. OFF
3) DIGITAL ZOOM (Menu setting) .................................... OFF
4) STEADY SHOT (Menu setting) ..................................... OFF
5) FOCUS (Menu setting). ......................................... MANUAL
6) REC FORMAT (Menu setting) ............................. HDV1080i
Fig. 6-1-13
R-Y
B-Y
R
G
B
C
Y
Y
E
M
G
Burst position
R-Y
B-Y
R
G
B
C
Y
Y
E
M
G
Burst position
PAL model
NTSC model