Sony HVR-HD1000C, Service Manual, Page: 189 / 426

6-41
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
12. Mechanical Shutter Adjustment (2)
RadarW RadarW RadarW RadarW RadarW
Adjust the close time and loss time every F number of the me-
chanical shutter and the high-speed shutter correction value to
correct the luminous exposure.
Adjustment Page 6F
Adjustment Address 7A to 7F
Note 1:
If reading/writing data on pages 6F set data: 06 to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages 6F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 06.
3) Input the following data to page: F (6F), address: 7A to 7F.
Note 2: Press the PAUSE (Write) button of the adjustment re-
mote commander each time to set data.
Address
Data
NTSC PAL
7A 80 80
7B 80 80
7C 80 80
7D 80 80
7E 80 80
7F 80 80
4) Select page: 0, address: 10, and set data: 00.
5) Select page: 0, address: 01, and set data: 00.
13. Linear Matrix Adjustment (1)
RadarW RadarW RadarW RadarW RadarW
Adjust the matrix coefficient for compensating the variation in
spectral sensitivity.
Adjustment Page 69
Adjustment Address BE to CF
Note 1: If reading/writing data on pages 69, set data: 06 to page:
0, address: 10, and then select pages: 9. By this data set-
ting, the pages 69 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 06.
3) Input the following data to page: 9 (69), address: BE to CF.
Note 2: Press the PAUSE (Write) button of the adjustment remote
commander each time to set data.
Address
Data
NTSC PAL
BE 06 06
BF 8E 8E
C0 FE FE
C1 67 67
C2 00 00
C3 35 35
C4 FE FE
C5 F2 F2
C6 05 05
C7 A0 A0
C8 FE FE
C9 8A 8A
CA 00 00
CB 19 19
CC FE FE
CD 92 92
CE 06 06
CF 2A 2A
4) Select page: 0, address: 10, and set data: 00.
5) Select page: 0, address: 01, and set data: 00.