Sony HVR-HD1000C, Service Manual, Page: 185 / 426

6-37
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 0 10 06
3
8
19 03
(68)
Press PAUSE (Write) button.
4
8
90 40
(68)
Press PAUSE (Write) button.
5 0 10 00
6 6 02
Check the data is “00”.
(Note 6)
7 6 4D 40
8 6 64 04
9 6 01 13 Press PAUSE (Write) button.
10 Wait for 2 seconds.
11 6 01 15
Press PAUSE (Write) button.
(Note 7)
12 Wait for 10 seconds.
13 6 02
Check the data changes to
“01”.
14 6 0C Check the data is “00”.
15 0 10 06
16
F
2F
Check the data is “00” to
(6F) “09”.
17 0 10 00
Note 6: If not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.
Note 7: The adjustment data will be automatically input to page:
6F, address: 20 to 3F.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE (Write) button.
2 6 01 25 Press PAUSE (Write) button.
3 6 01 00 Press PAUSE (Write) button.
4 6 4D 00
5 6 64 00
6 0 10 06
7
8
90 00
(68)
Press PAUSE (Write) button.
8
8
19 07
(68)
Press PAUSE (Write) button.
9 0 10 00
10 0 01 00
11
Perform “Flange Back
Adjustment (2)”.
7. Flange Back Adjustment
(Using the flange back adjustment chart and
subject more than 500 m away)
The inner focus lens flange back adjustment is carried out auto-
matically. In whichever case, the focus will be deviated during
auto focusing/manual focusing.
7-1. Flange Back Adjustment (1)
RadarW RadarW RadarW
Subject Flange back adjustment chart
(2.0 m from the front of lens)
(Luminance: 300 to 400 lux)
Measurement Point
Adjusting remote commander
Measuring Instrument
Adjustment Page 6F
Adjustment Address 20 to 3F
Specified value Data of page: 6F, address: 2F is
“00” to “09”
Data of pege: 6, address: 0C is “00”
Note 1:
Perform “HALL Adjustment”, “MR Adjustment” and
“Differential Gain Adjustment” before this adjustment.
Note 2: Perform the adjustment with the lens in horizontal state.
Note 3: If reading/writing data on pages 6F, set data: 06 to page:
0, address: 10, and then select pages F. By this data set-
ting, the pages 6F can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 4:
Don’t touch the zoom lever during adjustment.
Note 5: After adjustment, if the focusing to a subject located at
infinity failed, increase the illuminance of the chart and
perform readjustment.
Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHT SHOT .................................................................. OFF
3) COLOR SLOW S (Menu setting) ................................... OFF
4) REC FORMAT (Menu setting) ............................. HDV1080i
Preparations before adjustments:
1) Check that the center of Flange back adjustment chart meets
the center of shot image screen with the zoom lens at TELE
end and WIDE end respectively.