Sony HVR-HD1000C, Service Manual, Page: 151 / 426

6-3
HVR-HD1000J/HD1000U/HD1000N/HD1000E/HD1000P/HD1000C
•
Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by
z
in the following table.
Table 6-1-1 (2)
Replaced part
Adjustment Section Adjustment
(COMPLETE) (COMPLETE) (COMPLETE) (COMPLETE) (EEPR
OM)
VC-500 board CM-077 board BL-015 board PD-342 board VC-500 board IC1802 Supporting Radar
W
Initialization of Initialization of A, B, D, 1A, 1B page data
z
EVR data Initialization of 8, 9, C, 13, 18, 1C, 1D page data z
Initialization of F, 63 to 6F page data
z z
z z
z z
Camera Origin oscillation check
Initialization of 7C, 7E, 7F page data
z
HALL adj. (2) z z z
z
MR adj. z z z
Differential gain adj. z z z
Flange back adj. z z z
F No. & ND light quality standard data input z z z
Mechanical shutter adj. (1)/(2)
z z z
Linear matrix adj. (1)/(2)
z z z
Auto white balance standard data input z z z
LV standard data input z z z
Auto white balance adj. z z z
Color reproduction adj. z z z
MAX GAIN adj. z z z
White defect Adj.
z z z
Black defect Adj.
z z z
Angular velocity sensor sensitivity adj.
z
z
z
z
z
z
z
z
z
z z
EVF EVF automatic adj. z z
White balance adj.
z z
LCD LCD automatic adj. z z z
V-COM adj. z z
Transmissive mode white balance adj.
z z
Reflective mode white balance adj.
z z z
Sample hold phase adj. z z
Touch panel adj.
z
Mechanism Tape path adj.
System control
Node uniqe ID No. input
USB Serial number data setting
z
z
Servo, RF CAP FG duty adj.
z z
Switching position adj. z z
Error rate check
z z
Video S VIDEO OUT Y level adj.
z
S VIDEO OUT chroma level adj.
z
COMPONENT OUT Y level adj. z
COMPONENT OUT Pr level adj. z
COMPONENT OUT Pb level adj.
z
HALL adj. (1)
RadarW RadarW RadarW
Note 2:
When the repair is finished,
confirm the following items.
1. Shoot the all black subject (Attach
the lens cap and shoot), and con-
firm that there is no level differ-
ence like vertical stripes in the pic-
ture.
2. Shoot a subject of low light, and
confirm that there is no level dif-
ference like vertical stripes in the
picture.
3. Shoot a subject of normal light, and
confirm that there is no level dif-
ference like vertical stripes in the
picture.
When the above symptom occurs,
perform the whole process of
“Differencal Gain Adjustment”.
Note 3: IC2402 (Flash memory) on
the VC-500 board and IC5202
(32M Flash memory) on the
VC-500 board cannot be re-
placed.