Chapter 7 Keyframe Effects
7-29
7
Keyframe Effects
The system provides the following settings for effect execution
conditions.
• Loop: When the effect reaches the last keyframe, it
automatically returns to the first keyframe, and repeats the
effect according to the “Loop end time” setting.
• Loop end time:
When looping effects in more than one channel,
select whether the loop timing should be aligned with the
longest effect, or independent for each channel.
• Run together: Ignores the current delegation, and runs the effect
on all channels simultaneously.
• Cross-point hold: An effect is executed ignoring the cross-point
information in the effect, and using cross-point selections
from before the effect execution.
• Default keyframe duration:Selects the duration given to all
newly-inserted keyframes.
The effect run mode settings use the EFFECT RUN MODE menu.
Displaying the EFFECT RUN MODE menu
Use the following procedure to display the EFFECT RUN MODE
menu.
1
Display the first set of soft key indications in the EFFECT
UTILITY menu (a top menu).
71
EFF RUN
MODE
73
REGISTER
NAME
72
REGISTER
74
CHANNEL
COPY
77
DISK
MORE
78
COLOR
MATTE
EFFECT UTILITY menu soft key indications
2
Press F1 (EFF RUN MODE).
The EFFECT RUN MODE menu appears.
LOOP
RUN
TOGETHER
LOOP
END
TIME
XPOINT
HOLD
DEFAULT
KF DUR
SNAP SHOT
XPOINT
HOLD
EFFECT RUN MODE menu soft key indications
The following are some of the operations carried out in this menu.
Effect Run Mode Settings – 71
