5-79
Chapter 5
Special Effects Operations
5
Special Effects
Operations
2
Adjust the parameters for the following items.
Selecting the twist waveform – F2 (FORM H) and F3 (FORM V)
To select the modulation waveform in the horizontal direction,
press F2 (FORM H), and to select the modulation waveform in the
vertical direction, press F3 (FORM V).
Pressing either F2 or F3 cycles through the following possibilities:
SINE (sine wave)
t
PARAB (parabola)
t
TRIANG
(triangular wave)
t
RECT (square wave)
t
CIRCLE
(circle)
t
CUBIC (cubic polynomial)
Stopping the twist motion – F5 (LOCK)
Use the following procedure.
1
Press F5 (LOCK), turning it on.
This stops the twisting.
2
Turn the right knob to adjust the twisting phase.
• Right knob (“Ofst”): phase offset (–16 to +16)
Item
Setting
Knob adjustments of parameters
“Modulation H”
Nature of the
horizontal
modulation
Left (“Amp”): amplitude of the twists
(0 to 100%)
Center (“Freq”): degree of fineness of
the twists (0 to 100%)
Right (“Sped”): direction and speed of
the twists (–100 to +100%)
“Modulation V”
Nature of the
vertical
modulation
Left (“Amp”): amplitude of the twists
(0 to 100%)
Center (“Freq”): degree of fineness of
the twists (0 to 100%)
Right (“Sped”): direction and speed of
the twists (–100 to +100%)
