Chapter 7 Keyframe Effects
7-17
7
Keyframe Effects
3
Press the KF EDIT ENABL button, turning it on.
4
Hold down the SHIFT button and press the KF/DUR EFF
button.
5
Enter the numeric value (seconds and frames) using the
numeric keypad, and press the ENTER button.
For example, to enter 9 seconds 20 frames, enter “9.20”.
The maximum value which can be set is 59 seconds 29 frames.
Setting the effect duration
Use the following procedure.
1
Select the active channels and the reference channel.
If a number of channels are active, with different settings for
the effect duration, the following procedure sets them to be the
same.
2
Press the KF EDIT ENABL button, turning it on.
3
Press the KF/DUR EFF button.
4
Enter the numeric value (minutes, seconds and frames) using
the numeric keypad, and press the ENTER button.
For example, to enter 3 minutes 7 seconds 15 frames, enter
“3.7.15”. The maximum setting is 9 minutes 59 seconds 29
frames.
Maintaining a constant effect duration
If you do not wish a deletion or insertion of a keyframe to change
the overall duration of the effect, first press the CNST DUR button
in the duration setting section, turning it on.
In this state, when a keyframe is inserted or deleted, the positions
of the other keyframes on the time axis do not change, and thus the
total duration of the effect also remains unchanged.
