Chapter 7 Keyframe Effects
7-7
7
Keyframe Effects
This section describes how to generate and edit keyframes, and
how to make time settings.
Creating New Keyframes
Creating new keyframes
When creating a new keyframe, first access an empty register, then
use the following procedure to create the required number of
keyframes in turn, to build the effect.
1
Select the active channels.
If you select more than one channel, it is then necessary to
ensure that the channel required to be the reference channel is
selected last.
For details see pages 2-11 and 4-12.
2
Press the KF EDIT ENABL button in the keyframe operation
section, turning it on.
This switches the system to edit mode, allowing keyframes to
be created and edited.
3
Create the initial keyframe.
To return the initial image state to the conditions set in the
setup, press the CLR WORK BUFF button twice in
succession.
4
Press the BEFR/INSRT button.
This inserts the current keyframe as keyframe 1.
5
Create the next keyframe.
(Continued)
Generating and Editing Keyframes
