33
KD-30XS955/34XBR960/34XS955/36XS955
KD-30XS955/34XBR960/34XS955/36XS955
TAB on AZ-Bd is slightly bent at 45
Double ground wire is
TAB on QH-Bd is bent 45
away from memory stick
angle (towards front of set)
dressed in H-Bracket
connector.
clip.
Reason:
If TAB is not bent over, wires may get
snagged on DGC and break tab off PWB when
inserting chassis into set.
CHASSIS WIRE DRESSING DETAIL (ALL EXCEPT KV-34XBR960)
UZ-Bd to HBZ-Bd Conn. Assy. (with Red taping,
p/n: 1-900-806-83)
Dressed in purselock on MZ-Bd (p/n: 4-355-912-xx)
4P WY-Bd to DL-Bd Conn. Assy. (with Red Housing,
p/n 1-900-808-02)
Both 1-900-806-83 and 1-900-808-02 dressed in 9mm
purselock (p/n: 3-703-982-02)
Both 1-900-806-83 and 1-900-808-02 dressed in
H-Bracket Clip
NOTE: Directions of cables INSIDE clip.
(Black cable dressed in H-Bracket clip is USB cable
(QBOX to QH-Bd, p/n: 1-829-191-11)
CHASSIS WIRE DRESSING DETAIL (ALL EXCEPT KV-34XBR960)
Summary of Contents for FD Trinitron WEGA Hi-Scan KD-34XS955
