11
KD-30XS955/34XBR960/34XS955/36XS955
KD-30XS955/34XBR960/34XS955/36XS955
1-1.REAR COVER REMOVAL
SECTION 1: DISASSEMBLY
1-2.CHASSIS ASSEMBLY REMOVAL
1-3.SERVICE POSITION
Rear Cover
5 Screws
+BVTP 4 x 16
3 Screws
+BVTP 4 x 16
4 Screws
+BVTP 4 x 16
CAUTION!
- Heat sink on IC5004 is -15V. Do not allow heat sink
to touch GND or any other components.
Heat sink on Q8018 VpK=250V, is -15V. Do not touch or
short to GND or any other components.
CAUTION!
- Pay attention to Neck Assembly WY Board wire
harness to BY Board. The WY Board can easily break if
there is sudden or excessive tension on the harness.
1
Lift lever up on the right and left sides of the chassis bracket
and gently pull the chassis assembly away from the bezel.
2
Pull up and rotate both the AZ and DZ Boards in order to
service the unit.
1
Lift lever up on the right and left sides of the chassis
bracket and gently pull the chassis assembly away from
the bezel.
Summary of Contents for FD Trinitron WEGA Hi-Scan KD-34XS955
