Sony DVW-500/1, Operation Manual

Page: 90 / 169

5-4
Chapter 5 Recording/Playback
5-1 Preparing for Recording
Chapter 5 Recording/Playback
5-1-4 Monitoring Simultaneous
Playback of Video and Audio
Signals Being Recorded
Monitoring signals being recorded
To monitor audio and video signals currently being
recorded, press the HOME button, then select on by
pressing the
[F2]
(CONFI) button.
You can also set the VTR to play back the section of
tape before and after the edit portion with the CONFI
heads during editing.
For details, refer to “4-2-2 Simultaneous Playback During
Recording (CONFI)” on page 4-14.
Monitoring previously recorded video and
audio signals while recording
To monitor previously recorded audio and video
signals while recording (preread function), press the
[F1]
(PRE READ) button while holding down the SFT
button in the HOME menu.
For details, refer to “4-2-1 Setting the Preread Function
(PRE READ)” on page 4-14.
5-1-5 Recording Analog Audio
Recording with emphasis
You can emphasize analog audio signals that are
recorded from the ANALOG AUDIO INPUT
connectors. By emphasizing signals during recording,
then de-emphasizing them during playback, high
frequency noise can be suppressed without affecting
the original signal.
To record with emphasis, select on by pressing the
[F7]
(EMPHASIS) button in the PF2 menu (factory
setting).
The signals recorded with emphasis are automatically
de-emphasized during playback regardless of the
setting of the
[F7]
(EMPHASIS) button.