Sony DNW-A28, Operation Manual

Page: 10 / 102

Chapter 1
Overview
1-6
Chapter 1 Overview
Locations and Functions of Parts
CTL/TC/U-BIT
HOLD
SET
MENU
RESET
1
CTL/TC/U-BIT button
2
HOLD button
3
RESET button
4
SET button
5
MENU button
1
FL (fluorescent) display panel
Displays time data, status information, submenu, setup
menu and error messages.
2
PAGE button
Switches between pages in the submenu.
3
Operation buttons F1 to F4
Select items in the submenu.
You can use operation button F4 for preroll (see “
!º
Source video signal display” on page 2-17).
4
LIST/DOWN button
Press to make settings in the submenu.
5
MARK/UP button
Press to make settings in the submenu.
2
Timecode/setup menu operation
section
1
CTL/TC/U-BIT button
Alternately selects CTL (control), TC (timecode), and
U-BIT (user bits) as the time data used in editing and
displayed in the FL display panel.
2
HOLD button
Stops the progress of the timecode generator. Press this
button before setting timecode or user bits to hold
those values.
For more information, see section 2-6 “Setting Timecode”.
3
RESET button
Resets the CTL, TC, and U-BIT values displayed in
the FL display panel to 0. Resetting the CTL value
erase all edit points that have been set.
For more information, see section 2-6 “Setting Timecode”.
4
SET button
Use to make setup menu settings, timecode settings,
and user bit settings.
For more information about setup menu operations, see
Chapter 6, “Setup Menu”. For more information about
timecode and user bit settings, see 2-6 “Setting Timecode”.
5
MENU button
Use for setup menu operations. The setup menu
appears on the monitor connected to the VIDEO
OUTPUT 2 (SUPER) connector and FL display panel
when you press this button with the SUPER in the
submenu set to other than OFF (see page 2-24), and
the original display appears when you press it again.
For more information about setup menu operations, see
Chapter 6, “Setup Menu”.