Sony DNW-A28, Operation Manual

Page: 72 / 102

Chapter 6 Setup Menu
6-10
Chapter 6 Setup Menu
Menu items in the 300s, relating to editing operations
301
Item number Item name Settings
VAR SPEED
RANGE FOR
SYNCHRONIZATION
305 SYNC GRADE When editing in phase-synchronized mode with item 004 set to ON, select the target
phase synchronization accuracy.
ACCUR : ± 0 frame accuracy.
ROUGH:
±
1 frame accuracy.
In 625 mode
When the CAPSTAN in the submenu is set to 4FD or 8FD, select whether the capstan
servo should lock by accelerating or decelerating.
DECEL: Lock by decelerating.
ACCEL : Lock by accelerating.
Select the playback speed range when carrying out playback in variable mode from a
remote control unit connected to the REMOTE (9P) connector.
–1~+1: –1 to +1 times normal speed.
~1.5 : –1.5 to +1.5 times normal speed.
302 CAPSTAN
RE-LOCKING
DIRECTION In 525 mode
When the CAPSTAN in the submenu is set to 4FD, select whether the capstan servo
should lock by accelerating or decelerating.
DECEL : Lock by decelerating.
ACCEL : Lock by accelerating.
306 DMC INITIAL
SPEED When performing DMC editing with an editing control unit, select the initial tape speed
which is set automatically.
MANUAL : the speed determined by rotation speed of the jog dial
PLAY: normal playback speed
STILL: still playback speed
±0.03 to ±1: the speed selected in this range (±0.03, ±0.1, ± 0.2, ±0.5, and ±1 times
normal speed can be selected.)
Extended Menu
307 AUTO-DELETION
FOR
INCONSISTENT
DATA Select what happens when an erroneous edit point is set.
MANU : A warning is given by flashing the DELETE button.
The operator must manually delete the unnecessary edit point .
NEG&E: When inconsistent edit points are set, such as when an OUT point is before
an IN (or audio IN) point, or when too many edit points are specified, the previously set
edit point is deleted.
NEG: When inconsistent edit points are set, such as when an OUT point is before an
IN (or audio IN) point, the previously set edit point is deleted. When too many edit
points are specified, the DELETE button flashes to give a warning.
Note
Pressing the button corresponding to an edit point to be deleted and the DELETE
button simultaneously deletes the edit point. If an erroneous edit point is set (the
DELETE button is flashing), editing is not executed.
308 SELECTION OF
STD/NON-STD
FOR COMPOSITE
VIDEO IN Select the STD or NON-STD mode in accordance with a composite video input.
AUTO : Detect automatically whether the input video luminance and chrominance
signals are interleaved or not. If they are interleaved, select the STD mode. If they are
not interleaved, select the NON-STD mode.
STD: The STD mode is always used (forced STD mode).
N-STD: Use this setting when color framing of the input video signal is unstable (forced
NON-STD mode).