Sony DNW-A28, Operation Manual

Page: 18 / 102

Chapter 1
Overview
1-14
Chapter 1 Overview
Digital signal/timecode/remote control/power input and output section
1
REMOTE (9-pin remote control) connector (D-
SUB 9-pin)
When editing with two DNW-A28/A28P units,
connect this connector on each unit using a 9-pin
remote control cable (not supplied). When editing with
this unit and D-1, D-2, Betacam VTR, Digital Betacam
VTR or other external equipment, connect the external
equipment.
2
SDI IN (serial digital interface input) connector
(BNC type)
Input a D-1 format video/audio signal. When editing
with two DNW-A28/A28P units, connect the SDI
OUT connector
8
on the player unit with this
connector on the recorder unit.
3
DC OUT connector
This connector supplies power to the BVR-3 Remote
Control Unit.
4
TC IN (timecode input) connector (BNC type)
To record timecode from an external device, input the
timecode from the external device’s timecode output
connector.
5
DC IN (external power input) connector (XLR
4-pin, male)
When using the BKP-L551 Battery Adaptor to mount
a battery or the AC-DN2A adaptor on the side of this
unit, connect the power cable of the BKP-L551. When
using the AC-550/550CE AC Adaptor, connect to the
DC output connector of the AC-550/550CE. You can
also use the DC-210 Battery Adaptor to connect a BP-
90(A) Battery Pack.
For more information, see section 2-1 “Power
Preparations”.
6
TC OUT (timecode output) connector (BNC
type)
Outputs the following types of timecode, depending on
the VTR operating status.
During playback: The playback timecode
During recording: The timecode generated by the
internal timecode generator, or the timecode input
through the TC IN connector.
7
AUX (auxiliary) connector
This connector is used only for service.
8
SDI OUT (serial digital interface output)
connectors (BNC type)
Output a D-1 format video/audio signal. The same
signals are output from the left and right connectors.
Locations and Functions of Parts
AUDIO INPUT
AUDIO OUTPUT MONITOR OUTPUT
VIDEO
REMOTE
SDI IN
SDI OUT AUX
DC OUT
DC IN
TC OUT
TC IN
CH-1 CH-2
REF.IN INPUT OUTPUT
OFF ON
48V
-60 0 +4dBu
OFF ON
OFF ON OFF ON
48V
-60 0 +4dBu
1/3 2/4 R L
1
2(SUPER)
1 2
75W 75W
Cable clamps
1
REMOTE connector
2
SDI IN connector
3
DC OUT connector
4
TC IN connector
5
DC IN connector
6
TC OUT connector
7
AUX connector
8
SDI OUT connectors