Sony DNW-A28, Operation Manual

Page: 68 / 102

Chapter 6 Setup Menu
6-6
Chapter 6 Setup Menu
3
Press the SET button.
The display changes as follows.
525
525/625 SYSTEM SELECT
If the 525/625 setting
is changed. Turn power
off and on again.
4
Turn the jog dial to change the setting from “525”
to “625”, then press the jog dial.
The displays change as follows.
625
525/625 SYSTEM SELECT
Push SET button !!
To abandon the 525/625 setting operation
Press the MENU button a required number of
times to exit from the menu.
Note
Once you execute step
5
, it is not possible to abort
the operation.
5
Press the SET button.
The displays change as follows.
625
525/625 SYSTEM SELECT
Turn off/on POWER !!
6
Turn the POWER switch off momentarily, then on
again.
This switches from a 525(NTSC) to 625(PAL)
system; the 525 indicator goes out, and the 625
indicator lights in the FL display panel.
Menu bank operations (menu items B01 to
B14)
This unit allows four different complete sets of menu
settings to be saved in both 525 and 625 modes in what
are termed “menu banks” numbered 1 to 4. Saved sets
of menu settings can be recalled for use as required.
To access to menu item B01 quickly
You can recall any required menu item by turning the
jog dial after pressing the MENU button.
If you press the MENU button first, then the CTL/TC/
U-BIT button, you can jump directly to menu item B01
or H01. The recalled menu item toggles between B01
and H01 every time you press the CTL/TC/U-BIT
button.
Saving the current active menu settings
Set one of menu items B11 SAVE BANK 1 to B14
SAVE BANK 4 to ON, depending on which of the
menu banks you wish to save in, then press the SET
button.
Recalling settings from a menu bank
Set one of menu items B01 RECALL BANK 1 to B04
RECALL BANK 4 to ON, depending on which of the
menu banks you wish to recall from, then press the
SET button.
Basic Menu