6-34
DSC-F828
7. White Balance Adjustment (SY-096 board)
Correct the white balance.
If deviated, the LCD screen color cannot be reproduced.
Mode
PLAY (
)
Subject
Arbitrary
Measurement Point
Check on LCD display
Measuring Instrument
Adjustment Page
8F
Adjustment Address
78, 7A
Specified Value
The EVF screen should not be
colored.
Note1:
Use the AC power adaptor during this adjustment.
Note2:
Check the white balance only when replacing the following parts.
If necessary, adjust them.
1. LCD panel
2. Light induction plate
3. IC902
Adjusting method:
Order Page Address Data
Procedure
1
Check that “1. Data Setting
during EVF System
Adjustments” is performed.
2
80
71
52
Set the data.
3
80
89
02
Set the data.
4
8F
78
90
Set the data.
5
8F
7A
80
Set the data.
6
8F
78
Check that the LCD screen is
not colored. If not colored,
proceed to step 10.
7
8F
78
Change the data so that the LCD
screen is not colored.
8
8F
7A
Change the data so that the LCD
screen is not colored.
9
8F
7A
If the LCD screen is colored,
repeat steps 7 to 9.
10
80
71
FF
Set the data.
11
Save the data.
12
Wait for 2 sec.
13
If finish the EVF system
adjustments, release the data
setting.
(See “1. Data Setting during
EVF System Adjustments”.)
