Sony Cyber-shot DSC-F828 Service Manual Download Page 134

Page: 134 / 287

127

ou
bl

esho

ting

Microdrive/CF card

PictBridge-compliant printer

You have formatted a
“Memory Stick” by
mistake.

• All the data on the “Memory Stick” are erased by

formatting. You cannot restore them.

We recommend that you set the “Memory Stick” write-protect
switch to the LOCK position to protect accidental erasure
(page 144).

Symptom

Cause

Solution

You cannot insert a
Microdrive/CF card.

• You try to insert an unusable CF card.
• You are inserting it backwards.

—

Insert it from the right side (page 23).

You cannot record on a
Microdrive/CF card.

• The Microdrive/CF card is full.
• An unusable CF card is inserted.
• The CF card cover is open.
• The

/CF switch is set to

• When shooting movies using a CF card, the

image size is set to [640 (Fine)].

Delete unnecessary images (pages 43, 102).
—

Close the CF card cover (page 23).

Set the switch to CF (page 21).

Use a “Memory Stick PRO” or the Microdrive (pages 100, 144).

Set the image size to any setting other than [640 (Fine)].

The Microdrive is heated.

• You are using the Microdrive for a long time.

This is not a malfunction.

You have formatted a
Microdrive/CF card by
mistake.

• All the data on the Microdrive/CF card are

erased by formatting. You cannot restore them.

—

Symptom

Cause

Solution

The connection cannot be
established.

• The printer is not compliant with the PictBridge

standard.

• The printer does not set for the connection with

the camera.

• [USB Connect] is not set to [PictBridge] in the

SET UP settings.

Consult with the printer manufacturer.

Check that the printer is turned on and can connect with the
camera.

Set it to [PictBridge] (page 142).

Symptom

Cause

Solution

Summary of Contents for Cyber-shot DSC-F828
































































































































































































































































































Search results

Summary of Contents for Cyber-shot DSC-F828

Reviews:

Related manuals for Cyber-shot DSC-F828

Brands by name

Popular brands

Sony Cyber-shot DSC-F828, Service Manual

Search results

Summary of Contents for Cyber-shot DSC-F828

Reviews:

Related manuals for Cyber-shot DSC-F828

Brands by name

Popular brands