Sony BVP-900 Series, Maintenance Manual

Page: 7 / 520

1-1 (E)
BVP-900 P1
Section 1
Installation
1-1. Check of ROM Version
When the BVP-900/900P is used under the camera system using MSU-700 and CNU-700, be sure to
check that the ROM version for IC10 on the CPU-171 board of the MSU-700 is Ver. 3.00 or higher and
that the ROM versions for IC4 and IC5 on the AT-89 board of the CNU-700 are Ver. 3.00 or higher.
If ROM replacement is required, contact your local Sony Sales Office/Service Center.
ROM Version
MSU-700
IC10/CPU-171 board Ver. 3.00 or higher
CNU-700
IC4 and IC5/AT-89 board Ver. 3.00 or higher
1-2. Supplied Accessories
Accessories Sony Part No. Qt’y
Angle adjustment brackets 2-280-511-01 2
Number plates (For side panel) 3-185-945-01 2
Clamp bands 3-612-712-01 2
Number plate (For rear panel) 3-612-749-01 1
Number plate (For UP tally lamp) 4-027-937-01 1