49
Channel Configuration Menu
Chapt
er
3
Me
n
u
Channel Configuration Menu
Overview
This menu is used for pertaining data to the input signals.
When Channel Configuration is selected, the following menus are displayed.
The current channel is displayed. Perform the input setting
for the selected channel.
Before setting
Set the input signal for each channel. A channel number (1
to 30) is entered with the numeric buttons (page 36).
This menu is not selectable in the following cases:
• When Side by Side is set to On
• When Wipe is set to On
• When Butterfly is set to On
• When Blending is set to On
Menu Function and Operation
i
Channel Configuration
1/3
CH01
Format
B
Input Port:
xxxxx
Input No:
xxxxx
Screen Aspect
B
Sync Mode:
xxx
Color Temp:
xxx
Picture Preset:
xxxxx
Matrix
B
Color Profile
B
v
V
i
Channel Configuration
2/3
CH01
Marker Preset:
xxxxx
H Shift Offset:
xxx
Channel Name
B
NTSC Setup Level:
:
xx
Component Level:
xxxxx
Betacam Setup Level:
:
xxx
RGB Range
:
B
1080I/PsF
B
Film Cadence:
:
xxx
v
V
i
Channel Configuration
3/3
CH01
Copy From
B
v
V
Note
Menu
Function and operation ([ ]: factory setting)
Format
Sets the input signal type.
Note
The default setting is 3G/HD/SD-SDI Auto.
3G/HD/SD-SDI
Sets the serial digital signal format (Single-link 3G-SDI, HD-SDI or SD-SDI).
3G/HD/SD-SDI Auto:
Changes the format automatically according to the Sampling
Structure, Bit Depth, Picture and transport scanning method information for Payload ID
of SMPTE-352M standard superimposed on the input signals.
Note
You can confirm the Payload ID information and the signal format status of the current
monitor in “SDI Payload ID Status” (page 80) of the System Status menu or using the
Status button on the controller.
For details on the display using the Status button, see “Displaying the Monitor Status
Page” (page 98).
3G-SDI:
Sets the signal format.
4:2:2 YCbCr 10bit
4:4:4 YCbCr 10bit
4:4:4 RGB 10bit
4:4:4 YCbCr 12bit
4:4:4 RGB 12bit
4:4:4 XYZ 12bit
HD/SD-SDI Auto:
Changes the format automatically according to the format of the input
signal.
SD-SDI
