100
Assigning a Function to a Function Button
Cha
p
te
r 4
Op
er
at
ions
Scanning Method:
Decode display of Byte 2_Bit 7 /
Byte 2_Bit 6
Link Number:
Decode display of Byte 4_Bit 7-6
Current Status:
Displays the current status of the monitor.
Format:
Displayed as “Video St Sampling
Str Bit Depth”.
Video Standard:
3G / DL / HD / SD
Sampling Structure:
422 YCbCr / 444 YCbCr / 444
RGB / 444 XYZ
Bit Depth:
10 / 12
I/PsF/P:
Interlace / PsF / Progressive
When the HDMI/DisplayPort signal is input
The same information as that of HDMI/DP Status in the
System Status menu is displayed.
HDMI signal
DisplayPort signal
Pixel Encoding:
RGB 4:4:4 / YCbCr 4:4:4 / YCbCr 4:2:2
Color Depth:
8bit / 10bit / 12bit (HDMI signal), or
6bit/8bit/10bit/12bit (DisplayPort signal)
Matrix
1)
:
ITU-R BT.601 / ITU-R BT.709
RGB Range
2)
:
Limit / Full
1) It is displayed when HDMI/DisplayPort Auto is set to On in the Matrix
menu of the Channel Configuration menu.
2) It is displayed when HDMI/DisplayPort Auto is set to On in the RGB
Range menu of the Channel Configuration menu.
Assigning a Function to a
Function Button
You can assign a function other than the factory preset on
the function button of the controller. The functions
assigned to the function buttons can be displayed
collectively.
Assigning a Function to a Function
Button
1
Select the Function Key menu in the Controller menu.
2
Select F1 to F16 button, and then the function assigned
on each button.
Assignable functions
Scan Mode, Native Scan, 16:9, H Delay, V Delay, External
Sync, Comb, Char Off, Color Temp, Status, Aperture,
Mono, Blue Only, R Off, G Off, B Off, Chroma Up,
Interlace, Pixel Zoom, Capture Load, Marker, Aspect
Marker, Area Marker 1, Area Marker 2, Center Marker,
Aspect Marker-Line, Aspect Blanking-Half, Aspect
Blanking-Black, Side by Side, Wipe, Butterfly, Blending,
Error Notify Clear, Audio Level Meter, ALM Hold Reset,
Time Code, Difference, Checkerboard, L/R Switch,
Horopter Check, Flip H, Black Frame Insertion, Black
Detail Mode, Degauss
For details on the assigned function, see “Function Key”
(page 82) in the Controller menu.
Displaying the Assigned Functions
Collectively
When no menu is displayed on the screen, press the
ENTER button on the controller. The functions assigned to
function buttons F1 to F8 are displayed on the screen.
STATUS (HDMI)
4/4
Pixel Encoding:
YCbCr 4:4:4
Color
Depth:
12bit
Matrix:
ITU-R
BT.601
RGB
Range:
---
v
V
CH01
STATUS (DisplayPort)
4/4
Pixel Encoding:
YCbCr 4:4:4
Color
Depth:
10bit
Matrix:
ITU-R
BT.601
RGB
Range:
---
v
V
CH01
F1: Time Code
F2: Checkerboard
F3: L/R Switch
F4: Horopter
F5: Flip H
F6: Marker
F7: Status
F8: Interlace
