manualshive.com logo in svg

Sono PV 2208, User Manual, Page: 42 / 44

Share
Download
Sono PV 2208 User Manual Download Page 42

PV 2208 User Manual  

                                                 

 

 

42

Init Display First 

Here you have to tell the system what type of video card interface you are 
using.  Choose PCI/AGP if you choose to use a PCI based graphics card or 
AGP/PCI if you have an AGP based graphics card. 

IDE Block Mode 

Most new IDE drives support block transferring for faster access.  If you 
choose “Enable” then the system will automatically detect the optimal block 
read/writes per sector. 

Onboard FDD Controller 

To enable the on-board floppy controller, this option must be set to “enable”.  
If you have a faster  add-in floppy controller then you will have to “disable” 
the on-board controller. 

UART 2 Mode 

This gives you the options to set your on-board IR (infra-red) port chip.  The 
choices are standard, ASKIR, HPSIR 

IR Function Duplex 

Here you can set the IR port function to either full duplex or half duplex. 

TX, RX Inverting enable 

Depending on different hardware requirements, this is used to invert the 
transmit/receive settings.  To avoid system errors, it is recommended that you 
do not change the default settings. 

Onboard Parallel Port 

Here you can change the on-board parallel port address.   
378H/IRQ7: 

LPT1  

278H/IRQ5: 

LPT2 

3BCH/IRQ7: 

LPT3 

or you can choose disable the on-board port.

 

Onboard Parallel Port Mode 

The external parallel devices determine the parallel port mode. 
EPP (Extended Parallel Port) 
ECP (Extended Capabilities Port) 
SPP (Standard Parallel Port) 

ECP Mode Use DMA 

Choose a DMA (Direct Memory Access) channel for the port. 

Parallel Port EPP Type 

Choose version 1.7 or 1.9 for EPP mode. 
 

 

Summary of Contents for PV 2208













































Reviews:

No comments