manualshive.com logo in svg

Sono PV 2208, User Manual, Page: 25 / 44

Share
Download
Sono PV 2208 User Manual Download Page 25

PV 2208 User Manual  

                                                 

 

 

25

PRIMARY MASTER/PRIMARY SLAVE/SECONDARY 
MASTER/SECONDARY SLAVE 

These sub-menus are for identifying the 2 channel types that have been installed in the 
computer.  There are 4 user definable and 45 predefined types for the Enchanted IDE 
BIOS.    
To select the hard disk you can either press the Page Up or Page Down buttons or 
simply enter in the number of the hard disk and press <Enter>.  It is important the 
specifications of your selected drive match those of the drive table.  The hard disk will 
not work properly if the incorrect drive information is entered.  If you cannot find your 
drive type on the drive table you may use “User” to define your drive type manually. 
 
In order to use “User” type for drive type, you must have certain drive information; 
the required information is listed below.  Enter the information using the keyboard and 
simply press <Enter>. Either the hard disk vendor or the system manufacturer will 
most likely have provided this information for you.   
 
If the controller of the HDD interface is ESDI, the selection shall be ”Type 1”. 
If the controller of the HDD interface is SCSI, the selection shall be “None”. 
If you select Type “Auto”, BIOS will Auto-Detect the HDD & CD-ROM Drive at the 
POST stage and showing the IDE for HDD & CD-ROM Drive. 
TYPE 

drive type 

CYLS. 

number of cylinders 

HEADS 

number of heads 

PRECOMP 

write precom 

LANDZONE 

landing zone 

SECTORS 

number of sectors 

MODE 

mode type 

If there is no hard drive installed select NONE and press <Enter>. 
 

Drive A Type / Drive B Type 

This sub-menu identifies the types of floppy disk drive A or Drive B that have been 
installed into the computer. 
360K, 5.25 in 

5-1/4 inch PC-type standard drive; 360 kilobyte capacity. 

1.2M, 5.25 in 

5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity. 

720K, 3.5 in 

3-1/2 inch double-sided drive; 720 kilobyte capacity. 

1.44M, 3.5 in 

3-1/2 inch double-sided drive; 1.44 megabyte capacity. 

2.88M, 3.5 in 

3-1/2 inch double-sided drive; 2.88 megabyte capacity. 

If there is no floppy drive installed select NONE and press <Enter>. 

 
 
 
 

Summary of Contents for PV 2208













































Reviews:

No comments