PV 2208 User Manual
28
Enabled
Activates automatically when the system boots up causing a
warning message to appear when anything attempts to access the
boot sector or hard disk partition table.
Disabled
No warning message will appear when anything attempts to
access the boot sector or hard disk partition table.
NOTE: If you are going to be running some sort of a disk diagnostic program we
recommend that you disable the warning message. The reason for this is that most of
those types of programs need to access the boot sector before running that type of
program.
CPU Internal Cache/External Cache
The following sub-menus speed up memory access. This is something that depends on
CPU/chipset design; the default value is enable.
Enabled
Enable Cache
Disabled
Disable Cache
CPU L2 Cache ECC Checking
This item allows you to Enable/Disable CPU L2 Cache EC checking the choices are to
either enabled, or disabled.
Quick Power On Self-Test
This sub-menu speeds up POST after you power up the computer, if it is enabled,
BIOS will shorten or skip some check during the POST.
Enabled
Enable quick POST
Disabled
Normal POST
Boot From LAN First
This sub-menu allows the user to choose to Enable/Disable power up the system
through a network by sending a wake-up frame or a signal; the choices are to
Enabled/Disabled.
Boot Sequence (First boot; Second boot; Third boot device)
This sub-menu determines which drive to search first for a disk operating system; the
default is floppy, HDD-0, LS120.
Swap Floppy Drive
This sub-menu allows you to determine whether to enable the swap floppy drive or
not, the choice again is; Enabled, Disabled.
Boot Up Floppy Seek
BIOS will figure out if the floppy disk drive installed is 40 or 80 tracks, it will process
this during POST. 80 tracks is for 760K, 1.2M and 1.44M, while 360K is a 40 track.