PV 2208 User Manual
10
2-2 System Memory
The PV 2208 mainboard can support up to 1.5GB of 100MHz or 133Mhz SDRAM.
Installing memory modules requires no system setup what so ever.
Note:
1. The PV 2208 mainboard can only accommodate DIMMs (Dual Inline
Memory Modules). The DIMM sockets on the PV 2208 are for 3.3V (power
level) SDRAM (Synchronous Dynamic Random Access Memory).
2. Due to the strict timing issues involved under this speed, you must insure that
SDRAM is 100/133MHz compliant.
Installing System Memory
Insert the DIMM as illustrated in the diagram below. Due to the number of pins
between each of the breaks in the module, the DIMM will only fit into the socket one
way. Please insure that the DIMMs that you are using are 3.3V.
To insert the DIMM into the socket, first the DIMM socket levers (the white levers on
either side of the DIMM socket) must be pushed out away from the socket itself. Then
line up the pins on the DIMM to the corresponding pins in the socket. Push the DIMM
securely down into the socket. As the DIMM slides into the socket, the DIMM socket
levers will snap back in toward the DIMM socket securing the DIMM into place.