manualshive.com logo in svg

Sono PV 2208, User Manual, Page: 36 / 44

Share
Download
Sono PV 2208 User Manual Download Page 36

PV 2208 User Manual  

                                                 

 

 

36

 

Mode Use IRQ 

This option determines the IRQ, which the modem will use. 
 

Soft-Off by PWRBTN 

When enabled, this option allows the user to place the system in a very-low power 
usage state simply by using the ON/OFF power button. By pressing the OFF button 
the system will receive only enough power to detect power button activity as well as 
Resume by Ring activity. The Soft-Off by PWRBTN allows you to select two options 

Instant Off

 and 

Delay 4 Sec

. 

 

HDD Power Down

 

When selected, this option will power down the Hard Drive after a given time. The 
user may choose 1-15 minute time frames. 
 

Doze Mode 

After a set time of system inactivity this option when selected, will slow down the 
CPU clock while all other devices operate at full speed. The user may select 

Disable

, 

10sec-1hour 
 
Suspend Mode 

When selected this option will shut down all devices except the CPU. The user has the 
option to Disable this function or to manually set the time after which the devices will 
be shut down. The user may select 

Disable

, 

10sec-1hour

 

 

VGA 

When set to ON (default), any event occurring at a VGA port will awaken a system, 
which has been powered down. 
The Choice: ON, OFF 
 

LPT & COM 

When set to LPT/COM (default), any event occurring at a hard or floppy drive port 
will awaken a system, which has been powered down. 
The Choice: LPT/COM, NONE, LPT, COM 
 

HDD & FDD 

When set to ON (default), any event occurring at a hard or floppy drive port will 
awaken a system, which has been powered down. 
The Choice: ON, OFF 

PCI Master 

When set to On (default, any event occurring at a hard or floppy drive port will 
awaken a system, which has been powered down. 
The Choice: ON, OFF 

Summary of Contents for PV 2208













































Reviews:

No comments