PV 2208 User Manual
13
2-4 Expansion Cards
Warning:
Always disconnect the power cord from your computer whenever your
are working on it. Failure to do so may result in sensitive electronic
components being damaged.
Note:
Always ground yourself to remove any static charge before touching any
electronic components in the system. Place all electronic components on
a static free surface or in an anti static bag when they are not being
handled or installed in the computer.
The PV 2208 mainboard has 1 AGP, 5 PCI, 1 ISA & 1 AMR expansion slots. To
install an AGP, PCI, ISA or AMR card, please follow the following procedure:
1. Read any documentation that is accompanied with the expansion card.
2. Ensure that any hardware setup such as jumper configuration has been
completed.
3. Remove the computer cover and unscrew and remove the bracket plate
that accompanies the slot to which you want to install the expansion card
into.
4. With great care align the card connectors with the socket connectors and
press the expansion card firmly into place.
5. Secure the card by replacing the screw from the bracket plate. Replace
the computer cover.
6. Perform any BIOS updating necessary.
7. Install any drivers and/or software necessary for the operation of your
expansion card.