manualshive.com logo in svg

Sono PV 2208, User Manual, Page: 37 / 44

Share
Download
Sono PV 2208 User Manual Download Page 37

PV 2208 User Manual  

                                                 

 

 

37

Wake Up on LAN/Ring 

When set to Enabled, any event occurring to the Modem Ring will awaken a system, 
which has been powered down. 
The Choice: Enabled, Disabled 

RTC Alarm 

When Enabled, you can set the date and time at which the RTC (real time clock) will 
awaken the system from Suspend Mode. 
The Choice: Enabled, Disabled 

Primary NTR 

When set to On (default) any event occurring at will awaken a system, which has been 
powered down. 
The Choice: ON, OFF 

Active Monitoring

 

This is a list of IRQ’s (Interrupt Requests) that can be exempted much as the COM 
ports and LPT ports above can. When an I/O device wants to gain the attention of the 
operating system, it signals the operating system by causing an IRQ to occur. When 
the operating system is ready to respond to the request, it interrupts itself and performs 
the task. 
As shown above, the choices are Enabled or Disabled. Disabled is the default. 
When set to Enabled, activity will neither prevent the system from going into a power 
management mode nor awaken it. 
IRQ 3   

(COM 2) 

IRQ 4   

(COM 1) 

IRQ 5   

(LPT 2) 

IRQ 6   

(Floppy Disk) 

IRQ 7   

(LPT 1) 

IRQ 8   

(RTC Alarm) 

IRQ 9   

(IRQ2 Redir) 

IRQ 10   

(Reserved) 

IRQ 11   

(Reserved) 

IRQ 12   

(PS/2 Mouse) 

IRQ 13   

(Coprocessor) 

IRQ 14   

(Reserved) 

IRQ 15   

(Reserved) 

 

 
 
 
 
 
 

Summary of Contents for PV 2208













































Reviews:

No comments