Sono PV 2208 User Manual Download Page 38 | Manualshive

Page: 38 / 44

Sono PV 2208 User Manual Download Page 38

PV 2208 User Manual

38

3-7 PNP/PCI Configurations

This section outlines the procedures for configuring the PCI (Personal Computer
Interconnect) bus system. The PCI bus system allows I/O devices to operate at speeds
nearing the speed the CPU itself uses when communicating with its own special
components. It is recommended that only experienced users make any changes to the
default settings, as the items covered in this section are very technical.

PNP OS Installed

Select Yes if the system operating environment is Plug-and Play aware.
The Choice: Yes, No.

Resource Controlled by

The Award Plug and Play BIOS can automatically configure the entire boot and Plus
and Play - compatible devices. If you select Auto, all the interrupt requests (IRQ) and
DMA assignment fields disappear, as the BIOS automatically assigns them.
The Choice: Auto, Manual

Reset Configuration Data

Normally, you lave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system configuration has caused such as serious conflict that the operating
system cannot boot.
The Choice: Enabled, Disabled

«
...
36
37
38
39
40
...
»

Summary of Contents for PV 2208













































Reviews:

No comments