34
8 Appendix 2
1. Remove the ten screws highlighted below:
2. Remove the bottom panel.
8. S0 v2 Skype
Modification
The latest upgrade to the S0 v2 mixer allows the
presenter to operate Skype on channel 9, with
the only interconnection being a USB cable. The
S0 v2’s USB audio feature has previously allowed
either PROGRAMME or RECORD bus audio
(selected by jumper) to be routed to a PC via
USB interface for the purpose of audio recording,
with a return path useful for providing a pre-fade
listen (PFL) for a playout system.
The upgrade gives you a third option, allowing
the cleanfeed output from the telco channel to
be routed to a PC via the USB. Setting both the
“microphone” and “speakers” within Skype to
‘S0 v2’ then allows full duplex communication
between the S0 v2 presenter and a caller,
enabling the user to audition the caller on PFL to
set levels before either going to air or recording
a feature.
Overview
The following modification procedure should be
completed if you intend to use Skype on channel
9 of your S0 v2.
Note
: In doing so, the front panel auxiliary input
will no longer function.
Tools Required
•
Pozi/Phillips screwdriver.
•
Tweezers
Procedure
