19
Configuration Options 3
channel 5 INP1 is LINE 5/1. INP2 refers to the line input with the higher
number on the channel i.e. on channel 5 INP2 is LINE 5/2.
Mode 1 INP1 & INP2 inputs available for selection (default for channels
5-7).
Mode 2 INP1 input only, the button is disabled.
Mode 3 INP2 input only, the button is disabled.
Mode 4 INP1 & USB Audio inputs available for selection.
Mode 5 INP2 & USB Audio inputs available for selection.
Mode 6 USB Audio input only, the button is disabled.
Mode 7 INP1 & INP2 & USB Audio inputs available for selection (default
for channel 8).
Channel 9 Input Select Modes are set using the TEL/AUX button. AUX1
refers to the AUX input on the rear panel. AUX2 refers to the AUX input on
the front panel.
Mode 1 TEL & AUX1 & AUX2 inputs available for selection (default).
Mode 2 TEL & AUX1 inputs available for selection.
Mode 3 TEL & AUX2 inputs available for selection.
Mode 4 TEL input only, the button is disabled.
Mode 5 AUX1 & AUX2 inputs available for selection.
Mode 6 AUX1 input only, the button is disabled.
Mode 7 AUX2 input only, the button is disabled.
Channel 9 Cleanfeed Control when CUE/PFL TALKBACK is active. This is set
using the CUE/PFL TALKBACK button.
Mode 1 Cleanfeed is muted when CUE/PFL TALKBACK is active (default).
Mode 2 Cleanfeed level is reduced when CUE/PFL TALKBACK is active.
USB Audio Input CUE/PFL Mode. This is used to automatically route the USB
Audio input to the CUE/PFL bus allowing it to be monitored on the Monitor,
Presenter and Guest Headphone outputs. It is set using the Monitor AUTO
CUE/PFL button.
Mode 1 The USB Audio input is automatically routed to the CUE/PFL bus
as well as being available on channels 5-8 (default).
Mode 2 The USB Audio input is not routed to the CUE/PFL bus.
Press the guest talkback button to go to page 2.
Page 2 – PGM and REC Button Modes (LED on PPM Scale 2)
PGM Button Modes are set using the PGM buttons on channels 1-9 and can
be activated on a per channel basis.
Mode 1 PGM is selectable (default).
Mode 2 PGM is always on, the button is disabled.
Mode 3 PGM is always off, the button is disabled.
REC Button Modes are set using the REC buttons on channels 1-9 and can
be activated on a per channel basis.
Mode 1 REC is selectable (default).
Mode 2 REC is always on, the button is disabled.
Mode 3 REC is always off, the button is disabled.
Page 3 – PFL Modes (LED on PPM Scale 3)
CUE/PFL Automatic Cancel Mode is set using the CUE/PFL buttons on
channels 1-9 and can be activated on a per channel basis.
