31
Appendix 1 7
6 = flash amber
7 = flash red/green
8 = flash red/amber
9 = flash green/amber
Select input on a channel
^ĞƚƐƚŚĞŝŶƉƵƚŽŶƚŚĞƐƉĞĐŝĮĞĚĐŚĂŶŶĞů
Command to S0 v2 Response from S0 v2
RCIP:ci
ACK
if the command was successfully completed
ERR
if the command could not be completed or the
parameters are out of range
ǁŚĞƌĞ
ĐсĐŚĂŶŶĞůŝĚĞŶƟĮĞƌ;ϭͲϵͿ
ŝсŝŶƉƵƚƐĞůĞĐƟŽŶ;ϭͲϯͿ
Select PGM on a channel
Enables/disables PGM on the specified channel
Command to S0 v2 Response from S0 v2
RCPG:cp
ACK
if the command was successfully completed
ERR
if the command could not be completed or the
parameters are out of range
where
c = channel identifier (1-9)
p = PGM control (0=off, 1=on)
Select REC on a channel
ŶĂďůĞƐͬĚŝƐĂďůĞƐZŽŶƚŚĞƐƉĞĐŝĮĞĚĐŚĂŶŶĞů
Command to S0 v2 Response from S0 v2
RCRE:cr
ACK
if the command was successfully completed
ERR
if the command could not be completed or the
parameters are out of range
ǁŚĞƌĞ
Đс ĐŚĂŶŶĞůŝĚĞŶƟĮĞƌ;ϭͲϵͿ
ƌс ZĐŽŶƚƌŽů;ϬсŽī͕ϭсŽŶͿ
പ
Select PFL on a channel
Enables/disables PFL on the specified channel
Command to S0 v2 Response from S0 v2
RCPF:cp
ACK
if the command was successfully completed
ERR
if the command could not be completed or the
parameters are out of range
where
c = channel identifier (1-9)
p = PFL control (0=off, 1=on)
Select START on a channel (Line Hold for channel 9 if input 1 is selected)
ŵƵůĂƚĞƐ^dZdďƵƩŽŶƉƌĞƐƐŽŶƚŚĞƐƉĞĐŝĮĞĚĐŚĂŶŶĞů
Command to S0 v2 Response from S0 v2
RCST:cs
ACK
if the command was successfully completed
ERR
if the command could not be completed or the
parameters are out of range
ǁŚĞƌĞ
Đс ĐŚĂŶŶĞůŝĚĞŶƟĮĞƌ;ϭͲϵͿ
Ɛс ^dZdĐŽŶƚƌŽů;ϬсŽī͕ϭсŽŶͿ
Set START button LED states
Sets the state of the START button on the specified channel
Note: Only valid when the Remote Mode for the current input on the
specified channel is set to USB Serial Control
Command to S0 v2 Response from S0 v2
RCSL:cs
ACK
if the command was successfully completed
ERR
if the command could not be completed or the
parameters are out of range
where
c = channel identifier (1-9)
s = LED state (0-9) 0 = off
1 = red
2 = green
3 = amber
4 = flash red
5 = flash green
6 = flash amber
7 = flash red/green
8 = flash red/amber
9 = flash green/amber
^ĞƚƚŚĞŵŽŶŝƚŽƌͬŚĞĂĚƉŚŽŶĞƐĞůĞĐƟŽŶƚŽW'D
Routes the PGM bus to the monitor and headphone outputs
Command to S0 v2 Response from S0 v2
RMPG:
ACK
Set the monitor/headphone selection to REC
Routes the REC bus to the monitor and headphone outputs
Command to S0 v2 Response from S0 v2
RMRE:
ACK
