124
Redbox User Handbook No 1
Command Description
Response
iii: Default delay
jjj: Delay time settings
where iii and jjj are a value in seconds between 2 and 252
kk: Remote settings
where 80 = Pin 10 is actioned on remote port
llllll: Level settings
where llllll is a 24 bit hex value defining the current
switch level.
mmm: Recovery time 1
where mmm is the current recovery time set for MAIN
between 2 and 252 in seconds
nnn: Recovery time 2
where nnn is the current recovery time set for AUX
between 2 and 252 in seconds
FRQ:nn
Output framerate selection where
-ACK:
nn selects which framerate is selected for the output where:
00 = 32k
01 = 44.1k
02 = 48k
03 = 88.2k
04 = 96k
05 = 176.4k
06 = 192k
IOD:nn
Fail immediately or delay on loss of lock where
-ACK:
nn selects between the two modes
00 = Use standard delay on loss of lock
01 = Fail immediately
LEV:nn
Level settings in dBFS
-ACK:
nn sets the level of silence between -39 and -84
MIS:nn
Switch which input is represented on the
MAIN side where
-ACK:
nn represents which channel has been chosen
00 = Main is input 1
01 = Main is input 2
MOD:nn
Sync mode selection where
-ACK:
nn selects the synchronization mode where:
00 = Master mode
01 = Auto mode
02 = Auto lock mode
03 = Slave
10
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SY
NCHR
ONISERS, DEL
A
Y
S & SILENCE DE
TEC
TORS - RB
-DSD1
