Redbox RB-PD2 User Handbook
87
SY
NCHR
ONISERS, DEL
A
Y
S & SILENCE DE
TEC
TORS - RB
-PD2
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
8
Sample Rate
This option selects the sample rate used for recording when the input source is set to
Analogue. From the record sub-menu select SAMPLE RATE. The available options are 32kHz,
44.1kHz and 48kHz. The default record sample rate is 48kHz.
Sample Width
This option selects the sample size used for recording in the analogue to digital conversion.
From the record sub-menu select SAMPLE WIDTH. The available options are 16BIT and 24BIT.
The default record sample width is 24bits.
Initials
This option sets the first 4 characters of the record filename that is automatically generated
when entering record. The filename consists of these 4 characters followed by a 4 digit
number which automatically increments as new recordings are made. The file extension for
all recordings is “WAV”. For example, with the initials set to “RECD”, the first record filename
will be “RECD0001.WAV”.
To set the initials, turn the rotary control to highlight a character and then press the rotary
control to enter edit mode. The highlight changes to a flashing line under the selected
character. Now turn the rotary control to select a new character in that position. When the
required character is shown, press and turn the rotary control to select a new edit position.
When the required changes have been made, select either OK to save the new initials, or
CANCEL to discard the changes. The default initials are “RECD”.
VOLUME
This selection shows the Volume sub-menu where you can set input and output gains
and also mute the outputs. The sub-menu items are INPUT PK DIGITS, OUTPUT GAIN,
ANALOGUE MUTE and DIGITAL MUTE.
Input Peak Digits
This option sets the full-scale dB input amplitude that will give full-scale digits in the
digital domain. From the VOLUME sub-menu select INPUT PK DIGITS. The available
options are +12 dB, +18 dB and +24 dB. The default value for input peak digits is +12dB.
Output Gain
This option sets the gain of the analogue output stage. From the VOLUME sub-menu
select OUTPUT GAIN. The available gain settings are from –6 dB to +24 dB in 1 dB
increments. The default value for output gain is +12dB.
Analogue Mute
This option mutes the analogue audio output. From the VOLUME sub-menu select
ANALOGUE MUTE. The available options are OFF and ON and by default, the analogue
mute is off. This option can be remotely controlled.
Digital Mute
This option mutes the digital audio output. From the VOLUME sub-menu select DIGITAL
MUTE. The available options are OFF and ON and by default, the digital mute is off. This
option can be remotely controlled.