66
Redbox User Handbook No 1
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SY
NCHR
ONISERS, DEL
A
Y
S & SILENCE DE
TEC
TORS - RB
-DS2
7
Additional Connections
Mains Input:
IEC Power Plug, 100-240 VAC, 47-63Hz, fused 60W peak,
30W average
Fuse Rating:
Anti-surge fuse 2A 20 x 5mm
Serial Communications Port:
9-way D-type socket
Remote Input/Output Port:
15-way D-type socket
Memory Expansion:
Internal Compact Flash™ storage card slot
Operational Controls
Display:
Vacuum fluorescent display
System Navigation:
Rotary selector with integral push-switch
Audio Bypass:
Via push-switch
Physical Specifications
Dimensions (Raw)
48cm (W) x 15.8cm (D *) x 4.2cm (H) (1U)
19” (W) x 6.2” (D*) x 1.7” (H) (1U)
Dimensions (Boxed)
59cm (W) x 27.4cm (D*) x 10.8cm (H)
23.2” (W) x 10.8” (D*) x 4.3” (H)
Weight
Nett: 1.6kg Gross: 2.2kg
Nett: 3.5lbs Gross: 4.8lbs
* Note that this product is deeper than standard Redboxes.
Opening the RB-DS2 to Add a Compact Flash Card
Warning: The power must be switched off at the supply and the power lead disconnected
before opening the unit. Removal of the cover can expose dangerous voltages.
1. Remove the 4 screws in the corners of the rear panel.
2. Remove the 4 screws on the top and bottom panels which hold the rear panel in place (2
on the top and 2 on the bottom).
3. Remove the screw on the front panel immediately to the left of the Bypass button.
The rear panel and main PCB will slide backwards out of the metal chassis giving you access
to the Compact Flash slot. To put the unit back together, slide the PCB back into the chassis
and refit the screws in reverse order.