82
Redbox RB-PD2 User Handbook
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SY
NCHR
ONISERS, DEL
A
Y
S & SILENCE DE
TEC
TORS - RB
-PD2
8
DELAY OPTIONS
DUMP MODE
SOURCE
SAMPLE RATE
SAMPLE WIDTH
RECORD
VOLUME
MEMORY CARD
REMOTES
CONTROL LOCK
SYSTEM
CLOSE
MAIN MENU
The Default Screen
The default screen shows the current selections for audio source, sample rate and sample
bit width in the top left of the screen. The selected delay value is shown on the left while
the current delay is shown in larger characters on the right. The “SECS” label shown next to
the current delay will flash if the current delay is below the SAFE PERIOD.
The current status of the unit is displayed on the status line at the bottom of the screen.
Also shown on the main screen is the mute status of the analogue and digital outputs, and
the status of the Compact Flash™ memory card, if fitted. When a memory card is fitted, a
small memory card symbol will appear above the analogue and digital audio output status
icons. A tick next to the memory card symbol indicates the card is ready for use, whereas a
cross indicates that there is an error.
All of the RB-PD2’s settings are configured from the main system menu with the exception
of the selected delay. The delay is adjusted directly from the main screen following the
instructions on page 77.
The Main Menu
ANALOGUE
48KHZ 16BIT
DELAY:
06.0 SECS
ZERO DELAY
A
A D
SECS
00.0
✓
Fig 8-6: The Default Screen
Fig 8-7: The Main Menu Screen
