96
Redbox RB-PD2 User Handbook
SYNCHRONISERS, DELAYS &
SILENCE DETECTORS
SY
NCHR
ONISERS, DEL
A
Y
S & SILENCE DE
TEC
TORS - RB
-PD2
8
Command
Description
Response
SRI:i_n
Set function for remote
input where:
ACK: or NAK:
i = remote input id (0-7)
n = 0 (no action)
n = 1 (build delay)
n = 2 (exit delay)
n = 3 (activate dump)
n = 4 (activate drop)
n = 5 (activate cough)
n = 6 (start new recording)
n = 7 (mute all audio outputs)
n = 8 (activate audio bypass)
SRO:o_n
Set function signal for remote
output where:
ACK: or NAK:
o = remote output id (0-5)
n = 0 (no action)
n = 1 (delay is at zero)
n = 2 (delay building)
n = 3 (delay is greater than safe period)
n = 4 (delay is at selected value)
n = 5 (delay exiting)
n = 6 (dump active)
n = 7 (drop active)
n = 8 (cough active)
n = 9 (record active)
n = 10 (audio outputs muted)
n = 11 (audio bypass active)
SRQ:n
Status request where:
STA:e_f_g_h_i_j_k_l_m_n
e = unit status (8 hex digits)
_o_p_q_r_s_t_u_v_w_x_y_z
f = current delay (8 hex digits)
g = selected delay (8 hex digits)
h = start mode setting
i = start play filename
j = safe period setting
k = dump mode setting
l = dump buffer length setting
m = dump play filename
n = source setting
o = sample rate setting
p = sample width setting