Page 35 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
Control All:
If the checkbox is enabled, the current EQ settings are sent to either all speakers of
the selected subsystem or all speakers of the setup depending on the settings of the
first dropdown menu. A warning popup window appears and allows cancelling the
action. All following changes are also applied to the selected speaker list. The
speaker index or the selected subsystem is also indicated in the upper left corner of
the Parametric EQ panel giving feedback to the user on what is currently controlled.
The makeup gain remains individual to each speaker and is not affected by the
control all setting.
Test Mode:
If this checkbox is enabled, the signal of the selected input is directly routed to the
speaker selected in the control area. This way each speaker can be listened to and
equalized separately. The input can be selected with the corresponding dropdown
menu.
Volume:
This slider controls the master volume of the Sonic Wave I processor. This controller
corresponds to the volume control on the WavePerformer Main Window.
Copy/Paste:
The copy button takes a snapshot of the current EQ settings. It enables the user to
switch to another speaker and apply these settings with the Paste button.
Reset:
Reset flattens the EQ curve of the current speaker or the selected list of speakers
when Control All is active.
Bypass:
The Bypass button switches on or off the EQ on the Sonic Wave I processor. The
current state is indicated through a green or red LED.
