Page 15 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
Mac OS X – Setup within Virtual Box
The Mac OS X Version of the Sonic Wave I configuration software package will be
available in the near future. Should this however be your preferred operating system,
you could use virtualization software like VirtualBox to install a virtual Windows
machine on a Mac OS X host. VirtualBox from Oracle is free to use and can be
downloaded from
http://www.virtualbox.org
To enable network communication from the virtual Windows machine to a
connected Wave I processor, the following Network settings have to be configured:
Mac OS X (Host):
Set the network adapter that is used for communication with the Wave I processor
to a static IP address in the same range as the processor. The subnet mask must be
set to 255.255.255.0. Make sure to disable wireless if you use a cabled connection
or that there is no other cable plugged if you connect over AirPort. Make sure there
is no firewall active.
Figure 1.8
