Page 39 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
mouse. Each band can be enabled with the checkbox above its parameters.
Note: The WavePerformer can only be used when the speakers
connected to the Sonic Wave I processor have been setup using the
WaveDesigner software.
Control Elements
Menu bar
File Menu:
The file Menu gives you the possibility to load and save presets from the preset list
and manually Import a layout from the processor or from a file. Furthermore, here
you can quit the WavePerformer application.
Processor:
In the processor menu, with Save Default Preset you can save the currently open
layout as the default preset. This is then the state the Sonic Wave I processor will be
in when it is powered up.
Shutdown will turn of the Sonic Wave I processor.
View:
Display Grid turns on and off the grid on the workspace. If enabled, there is a
checkmark besides the menu entry. Display Index toggles on and off the display of
the Index besides the loudspeaker. Clip Distance selects the behavior after the
maximum distance (page 30). Show Toolbar allows to remove the right toolbar to
gain more space fort he loudspeaker placement area.
Help Menu:
The help menu show the about box that tells you about the software version.
Figure 1.25
