Page 27 of 72 / Confidential / Version 1.1
Eichweg 6 8154 Oberglatt Switzerland tel +41 (0) 44 850 0838 fax +41 (0) 44 850 0839 [email protected]
www.sonicemotion.com
Store:
This button has the same function as
Store default values
in the Processor Menu in
the Menu bar: Settings like equalizer, gains, delays etc. are made real-time
meaning as soon as any parameter is modified, this is audible. Select
Store as
default
in the Processor menu or click the Store button in the upper toolbar to write
the settings to the Sonic Wave I processors internal memory. Storing these
parameters does not require a restart of the processor. If the Sonic Wave I processor
is shut down without storing, all settings you have done in this session will be lost. In
any case, if you choose to shut the Processor down or close the WaveDesigner
software a dialog will appear asking you if you want to store to the Processor or also
store to the project file on your computer.
Right Tool Bar
On top of the right-hand tool bar, there are three buttons to toggle the different
operation modes of WaveDesigner.
Selection mode:
In this mode, speakers can be selected by mouse click and moved around.
With right mouse click, a context menu can be opened to delete this speaker,
open its properties dialog or to open the EQ panel for that speaker.
If a speaker is selected, it can be deleted with the delete key. Several
speakers can be selected by pressing control key and clicking them or by
defining a rubber band area around them with pressed left mouse button.
Navigation mode:
This mode is simply for navigating in the workspace. When enabled, the
mouse pointer changes to a hand icon. No elements in the workspace can
be selected or moved. Tip: you can also navigate by pressing the middle
mouse button.
Speaker Add mode:
In Speaker Add mode, loudspeakers can be added to the workspace by
clicking the left mouse button. When enabled, the mouse pointer
changes to a cross to allow precise positioning.
Figure 1.16
